Wholesale of low voltage electric products

0 items │ 0,00 €

PRIKAŽI KATEGORIJE

Built-in radar motion sensor for luminaires L160

26,82 €
Add to Cart

Built-in radar motion sensor for luminaires L160

product code: 494566

Radar motion sensors movement unlike infrared motion sensations and through thin, solid material, and can be installed in a plastic box, suspended ceiling of plasterboard and mineral wool, or lighting fixtures. However, one should take into account that the radar waves do not pass through metal surfaces! Hidden setting has advantages both for aesthetics as well as safety-technical sense. The delay time, sensitivity and inclusion of sensors depending on illumination environment can be equally smoothly regulated.


-Infrared motion sensor with radar technique for hidden mounting
-color: white

Built-in radar motion sensor L160:
The small size of this motion sensor makes it suitable to use in luminaries as actuating element. The radar technique enables installation of the sensor undercover of luminaries or behind thin plates or walls. The LED signal lamp informs the user on the operating status of the sensor.Three operating parameters (time delay, sensitivity and ambient light) can be continuously adjusted)
Technical data:

Rated voltage:

230 V AC

Switchable power:

1200 W

 (230 V AC incandescent lamp)

 Power consumption:

0,9 W

 Motion speed sensitivity:

1 … 1,5 m/s

 Detection range:

160°

 Time delay:

8 s – 12 min (adjustable)

 Detection distance:

3-10 m (adjustable)

 Ambient light:

2 – 2000 lux (adjustable)

 Operation temperature:

0 °C - +40 °C

 Relative humidity:

max. 90%

 Radar wave:

5,8 GHz

 Mounting height:

2,5 m




Contains high sensitivity detector. If the sensing area living being, the camera will turn on connected load (reflektor).
Automatically responds to ambient illumination (day and night function).
Installation is simple and broad applicability.
Sunk motion sensor is recommended for consumers' control indoors where concealed way of installing ensures estetičniji look. The delay time and the inclusion of sensors depending on illumination environment can be continuously adjusted, but it should be observed that the ex-post regulation may be made only by re dismantling sensor installed.