Wholesale of low voltage electric products

0 items │ 0,00 €

PRIKAŽI KATEGORIJE

Device for electrostatic coating MULTISTATIC 700 CORONA SUPREME

Add to Cart

MULTISTATIC 700 CORONA SUPREME

product code: 20070025

The device for manually applying colored powder (electrostatic powder coating).
                                   
TECHNICAL EC UNIT:
 Electricity: single-phase AC / Source Voltage: 220 V / tolerance: + 10% -15% / frequency: 50/60 Hz
INFORMATION ON CURRENT:
Protection: IP54 (P 43) / Operating temperature: + 10 ° C to + 50 ° C / Hand Gun: 100 kV (US Patent No. 5,678,770) /
Nominal input voltage: 10 V ac / Frequency: 17000 Hz
Rated output voltage: 100kV / Nominal output current: 0.05m /
Maximum output current: 0.12m / Short-circuit current: 0 mA
Polarity: negative (optional positive) / Tribo gun: positive polarity
DATA compressed air:
Maximum inlet pressure 10 bar / Maximum inlet pressure 6 bar
Maximum water vapor content of compressed air 1.3 g / Nm3
Maximum oil vapor content of compressed air 0.1 ppm
Maximum compressed air consumption in Nm3 / h 13.2
The maximum output of the fullness of one handgun 100 kV, with the constant pressure of air transport powder to 6 bar air dose of 10 and a length of pipe cleaners of 5.8 m, 30 kg / h
(Epoxy powder IG EP 149, G 1,55g / cm3)
SCOPE:
Electrostatic powder coating is specially suited for manual coating of workpieces, which is plasticized in small and medium series.
DELIVERY:
ES control module is mounted in the housing: 1 pc
-hand Gun voltage of 100 kV power cable and suction pipe cleaners: 1 unit
-ddevices on wheels: 1 pc
DURING ACTION TO PRICE FREE DEVICE NOT SUPPLIED:
 - Fresh powder 25 kg: 1 piece
EXTRA CHARGE CAN NOT ORDER:
- According to customer additional charge is delivered and TRIBO gun
FUNCTIONAL DESCRIPTION:
Fluidized (current) powder from the reservoir is drawn in by the injector air transport powder. Through pipe powder mixture of powder and air comes in the gun. Dust gets an electrostatic charge before it reaches the nozzle gun. One intense electrostatic field exists between the nozzle gun and a grounded object. Electrostatically charged powder adheres to the surface of the workpiece.
Line voltage is converted to a control module in the high-frequency current. This current gradually through the high-frequency transformer and a high-voltage cascade converts the guns in the 100 kV and that voltage comes to the electrodes. Air transport powder, air damper and air for fluidization regulated by the control module. The powder fluidization (becomes liquid) air that comes through a porous plastic plate. Fluidized powder receives the liquid property.
-Price on request .